Vastu & Factory
First of all an ideal site, free from any of Vastu defects should be selected. After selecting the site, in designing a lay-out for industry and providing for utilities special attention should be paid for the following aspects :The sloping of floors should be towards East, North and North-East, More open space should be left in the East and North side.Building’s height can be equal in all sides, otherwise South and Western sides should not be taller in height as compared to East and North.Well, bore well, underground reservoir, sink, pools, swimming pools etc. should be located in North-East or Eastern zone, preferably between Mid East and North East.Stair cases should always be provided in South West part of the building.Overhead water tank may be erected in South West, South or West. Its height should be more than that of buildings height in North East corner.Toilets may be placed in North West or South East. North East and South West corners should be strictly avoided for this purpose.Weigh bridge or weighing machines may be placed in North West or Central East.Parking of heavy vehicles like trucks, tractors, trolleys or cranes etc, should be on the roads outside or if it is to be inside, they should be parked in South West zone.Cycles, scooter, cars, light commercial vehicles can be parked in North West, North or East side of buildings. North East should always be free from any parking of vehicles.Lawns with big avenue trees can be developed on South and West sides.Small lawns with fountains etc (without big trees) can be developed in North East, North and East also. Here only small plants can be grown.Administrative and other office blocks can be constructed in North, East, South or South West keeping the heights of these buildings lower than that of main factory.Staff quarters may be built on East without touching East wall, in North, West or South East. Multi storied flats may be constructed in South zone without touching main factory building.Staff canteen may be placed in South East.Guard Room should be placed near gates in such an advantageous position so that the guards can see approaching persons, vehicles etc. without any obstruction. North East direction should be avoided for a guard room or security cabin. For East facing gate the security office should be on South East side of gate, and for North facing gate it should be on North West side.Time office should be placed near gate for entry for workers but not in the South direction.Heavy plants and machineries should be erected in West, South and South West zones leaving the North West and South East corners. North East and centre of the building should be avoided for placing heavy machineries.Light and auxiliary machines, work equipments and tools can be placed in Eastern and Northern sides except in North East, North West and South East corners.Generator, boilers, ovens, oil fired or electric furnaces, switch gears, capacitors, transformers, control panels, smoke chimney etc. all should be located in South East.Heavy raw materials stores may be placed in South West, South or West.Semi processed materials can be stocked in South or West sides.Finished goods stores, packing and forwarding can be in North West, in East or South East. North West is preferable. North East should always be avoided.Maintenance workshop may be in South, South West avoiding North East and centre. Maintenance and consumable stores should be nearer to the workshop.A temple (even a small will do) in the North East corner should be built and maintained neat and clean. No material should be stacked here.Toilets in the administrative building or in other parts of factory or mill should be made in South East or North West area and if septic tank is to be built for that purpose, it should be built in between North and North West or between East and South East.
The Ideal Factory Concept as per Vaastu
1. A compound -wall is a must.
2. The main entrance of the Factory should be situated towards North, East or North-East to gain excellent profits.
3. The entrance door should always be of a greater size.
4. A big Factory should have doors on two sides. They should be on the North, East, North- East or North-West.
5. The finished products should be taken out of factory through the door at the North-West direction. This will ensure quicker disposal of finished products and greater profits for the Company.
6. The South and West area of the compound should never be kept empty or vacant.
7. Energy meters, furnaces, transformers, generators, boilers etc. and other equipment involving heat-energy should always be kept in the South-East direction. This is very essential for smooth operation of the Factory.
8. The Storeroom of the Factory should be in the South or West direction. The Storeroom may extend from South towards the West. This will provide great assistance for continuous flow of goods in and out of the Factory.
9. It is very important to keep the North-East area of the compound and that of inside the premises very clean and open or empty.
10. The office in the Factory should be located in North or East direction. During business deals and discussions , the owner should always face the North or East direction for reaping greater benefit from the deal.
11. The heavy machinery in the Factory should be kept on the South, South-West and West areas of the Factory.
12. The final products to be processed for sales should be kept in the North-West area of the Factory.
13. The toilet of the Factory should be located in the NorthWest or South-East direction.
14. North West side or South-East side are the best positions for the guardroom.
15. Parking area be provided at North-west or North-east area also. However, in the North- East area only the light vehicles like scooters, cycles etc. are permitted. but without any shed.
16. Water pumps, Bore-wells underground Water Tanks, Pumps etc. are best located in North-East area only.
17. If overhead Tanks are to be constructed or erected, they should be at West. In any case South-West and North-East area must be avoided for erecting overhead Water Tank.
18. Storing of any Raw- material, whether inside or outside in the Industry or Factory must be in the South, West or South-West.
Boundary Walls and Gate of a Plot
Divide the length of the side of the plot on which gate is to be installed, into nine equal parts and place the gate as shown in the figure. For your convenience you can keep gates as under.
i) For facing East - Towards N-E
ii) For facing North - Towards N-E
iii) For facing West - Towards N-W
iv) For facing South - Towards S-E
if you want any remedies contact with us
pandit
sharad kumar
india-091-9592157000
2. The main entrance of the Factory should be situated towards North, East or North-East to gain excellent profits.
3. The entrance door should always be of a greater size.
4. A big Factory should have doors on two sides. They should be on the North, East, North- East or North-West.
5. The finished products should be taken out of factory through the door at the North-West direction. This will ensure quicker disposal of finished products and greater profits for the Company.
6. The South and West area of the compound should never be kept empty or vacant.
7. Energy meters, furnaces, transformers, generators, boilers etc. and other equipment involving heat-energy should always be kept in the South-East direction. This is very essential for smooth operation of the Factory.
8. The Storeroom of the Factory should be in the South or West direction. The Storeroom may extend from South towards the West. This will provide great assistance for continuous flow of goods in and out of the Factory.
9. It is very important to keep the North-East area of the compound and that of inside the premises very clean and open or empty.
10. The office in the Factory should be located in North or East direction. During business deals and discussions , the owner should always face the North or East direction for reaping greater benefit from the deal.
11. The heavy machinery in the Factory should be kept on the South, South-West and West areas of the Factory.
12. The final products to be processed for sales should be kept in the North-West area of the Factory.
13. The toilet of the Factory should be located in the NorthWest or South-East direction.
14. North West side or South-East side are the best positions for the guardroom.
15. Parking area be provided at North-west or North-east area also. However, in the North- East area only the light vehicles like scooters, cycles etc. are permitted. but without any shed.
16. Water pumps, Bore-wells underground Water Tanks, Pumps etc. are best located in North-East area only.
17. If overhead Tanks are to be constructed or erected, they should be at West. In any case South-West and North-East area must be avoided for erecting overhead Water Tank.
18. Storing of any Raw- material, whether inside or outside in the Industry or Factory must be in the South, West or South-West.
Boundary Walls and Gate of a Plot
Divide the length of the side of the plot on which gate is to be installed, into nine equal parts and place the gate as shown in the figure. For your convenience you can keep gates as under.
i) For facing East - Towards N-E
ii) For facing North - Towards N-E
iii) For facing West - Towards N-W
iv) For facing South - Towards S-E
if you want any remedies contact with us
pandit
sharad kumar
india-091-9592157000
No comments:
Post a Comment